HDPE 2 -Way Outdoor Direct Curted Microduct

HDPE 2 -Way Outdoor Direct Curted Microduct

Вид оплаты:	L/C,T/T,Paypal,others,Cash
Инкотермс:	FOB,CFR,CIF,EXW,FAS,FCA,Express Delivery
Количество минимального заказа:	1000 Meter
транспорт:	Ocean,Land,Air,Express
Порт:	Shenzhen,Guangzhou

Contact Now

Атрибуты продукта
Упаковка и доставка
Описание продукта
Возможности поставки ...
Other information

Атрибуты продукта

Модель: DB2

марка: OEM

Diameter: 16/12 14/10 12/8 10/6mm

Length: customization

Ovality (%, Before Coiled): 5%

Наименование: microduct

Material: HDPE

Служба обработки: Экструзия

Варианты цвета: Белый, красный, зеленый, синий

Применение: underground installation

Толщина подмонта: 2,0 мм

Толщина оболочки: 1,2 мм или индивидуально

Упаковка и доставка

Продажа единиц жилья:	Meter
Тип упаковки:	Стандартный экспортный пакет, длина барабана составляет 2000 м или настраивается
Пример с картинкой:

The file is encrypted. Please fill in the following information to continue accessing it

Описание продукта

HDPE 2 -Way Outdoor Direct Curted Microduct

Описание продуктов для HDPE Micro Duct Pipe :

HDPE Microduct 2 способа пучков для воздушных волокон, которые будут установлены с помощью воздушной машины.

Микроклассные пакеты, состоящие из 18/14, 16/12, 14/10, 12/8, 10/6, 8/4, 7/3,5, 5/3,5 мм подразделов, или настраиваемые. Внутренний микродукт предназначен для того, чтобы быть гибким и легким, но долговечным и простым в обращении. Микродукт имеет подходящие характеристики низкого трения на внутренней поверхности.

Название продукта: 2 -й способ микродук, прямая захороненная труба микропродуктов, прямой прямой микропродаж на открытом воздухе

Подробно описывает изображения для микропроб -трубы HDPE:

Спецификация 7 -пуховой трубы микропроката:

Raw material:
HDPE of a high-molecular type with the following parameters is used for production of the microduct:
Melt flow index	0.1～ 0.3 g/10 minutes (190 C , 2.16KG)	EN ISO 1133
Density:	Min. 0.940 g/cm3	ISO 1183
Tensile strength at yield:	Min. 21MPa	ISO 527
l Elongation at the break	Min 350%	ISO 527
l Environmental stress crack resist (F50)	Min. 350 hours	ISO 4599

Physical and Mechanical Properties of Sub-duct 18/14mm
1	Visual appearance	Visual inspection	Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.
2	Outer diameter	GTOC	18.0mm ± 0.1mm
3	Wall thickness	GTOC	2.0mm ± 0.10mm
4	Inner diameter clearance	Blowing steel ball	A 10mm steel ball can be blown freely through the duct.
5	Ovality	GTOC	≤ 7%
6	Pressurization	5 minutes @12 bar each duct	No damage and leakage
7	Kink	IEC 60794-1-2 Method E10	≤ 180mm
8	Tensile strength	Rate of extension: 100mm/min	≥ 1800N
9	Impact	IEC 60794-1-2 Method E4 1.0 J Impact, recovery time 1 hour	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
10	Min. bend radius	216mm	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.

Physical and Mechanical Properties of Sub-duct 16/12mm
1	Visual appearance	Visual inspection	Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.
2	Outer diameter	GTOC	16.0mm ± 0.1mm
3	Wall thickness	GTOC	2.0mm ± 0.10mm
4	Inner diameter clearance	Blowing steel ball	A 10mm steel ball can be blown freely through the duct.
5	Ovality	GTOC	≤ 7%
6	Pressurization	5 minutes @12 bar each duct	No damage and leakage
7	Kink	IEC 60794-1-2 Method E10	≤ 160mm
8	Tensile strength	Rate of extension: 100mm/min	≥ 1600N
9	Impact	IEC 60794-1-2 Method E4 1.0 J Impact, recovery time 1 hour	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
10	Min. bend radius	192mm	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.

Physical and Mechanical Properties of Sub-duct 14/10mm
1	Visual appearance	Visual inspection	Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.
2	Outer diameter	GTOC	14.0mm ± 0.1mm
3	Wall thickness	GTOC	2.0mm ± 0.10mm
4	Inner diameter clearance	Blowing steel ball	A 8.5mm steel ball can be blown freely through the duct.
5	Ovality	GTOC	≤ 7%
6	Pressurization	5 minutes @12 bar each duct	No damage and leakage
7	Kink	IEC 60794-1-2 Method E10	≤ 140mm
8	Tensile strength	Rate of extension: 100mm/min	≥ 1350N
9	Impact	IEC 60794-1-2 Method E4 1.0 J Impact, recovery time 1 hour	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
10	Min. bend radius	168mm	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.

Physical and Mechanical Properties of Sub-duct 12/8mm
1	Visual appearance	Visual inspection	Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.
2	Outer diameter	GTOC	12.0mm ± 0.1mm
3	Wall thickness	GTOC	2.0mm ± 0.10mm
4	Inner diameter clearance	Blowing steel ball	A 8mm steel ball can be blown freely through the duct.
5	Ovality	GTOC	≤ 7%
6	Pressurization	5 minutes @12 bar each duct	No damage and leakage
7	Kink	IEC 60794-1-2 Method E10	≤ 120mm
8	Tensile strength	Rate of extension: 100mm/min	≥ 1200N
9	Impact	IEC 60794-1-2 Method E4 1.0 J Impact, recovery time 1 hour	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
10	Min. bend radius	144mm	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.

Physical and Mechanical Properties of Sub-duct 10/6mm
1	Visual appearance	Visual inspection	Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.
2	Outer diameter	GTOC	10.0mm ± 0.1mm
3	Wall thickness	GTOC	2.0mm ± 0.10mm
4	Inner diameter clearance	Blowing steel ball	A 6mm steel ball can be blown freely through the duct.
5	Ovality	GTOC	≤ 7%
6	Pressurization	5 minutes @12 bar each duct	No damage and leakage
7	Kink	IEC 60794-1-2 Method E10	≤ 100mm
8	Tensile strength	Rate of extension: 100mm/min	≥ 1000N
9	Impact	IEC 60794-1-2 Method E4 1.0 J Impact, recovery time 1 hour	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
10	Min. bend radius	120mm	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.

Physical and Mechanical Properties of Sub-duct 8/4mm
1	Visual appearance	Visual inspection	Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.
2	Outer diameter	GTOC	8.0mm ± 0.1mm
3	Wall thickness	GTOC	2.0mm ± 0.10mm
4	Inner diameter clearance	Blowing steel ball	A 5mm steel ball can be blown freely through the duct.
5	Ovality	GTOC	≤ 7%
6	Pressurization	5 minutes @12 bar each duct	No damage and leakage
7	Kink	IEC 60794-1-2 Method E10	≤ 80mm
8	Tensile strength	Rate of extension: 100mm/min	≥ 720N
9	Impact	IEC 60794-1-2 Method E4 1.0 J Impact, recovery time 1 hour	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
10	Min. bend radius	96mm	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.

Physical and Mechanical Properties of Sub-duct 7/3.5mm
1	Visual appearance	Visual inspection	Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.
2	Outer diameter	GTOC	7.0mm ± 0.1mm
3	Wall thickness	GTOC	1.75mm ± 0.10mm
4	Inner diameter clearance	Blowing steel ball	A 5mm steel ball can be blown freely through the duct.
5	Ovality	GTOC	≤ 7%
6	Pressurization	5 minutes @12 bar each duct	No damage and leakage
7	Kink	IEC 60794-1-2 Method E10	≤ 70mm
8	Tensile strength	Rate of extension: 100mm/min	≥ 630N
9	Impact	IEC 60794-1-2 Method E4 1.0 J Impact, recovery time 1 hour	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
10	Min. bend radius	84mm	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.

Physical and Mechanical Properties of Sub-duct 5/3.5mm
1	Visual appearance	Visual inspection	Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.
2	Outer diameter	GTOC	7.0mm ± 0.1mm
3	Wall thickness	GTOC	0.75mm ± 0.10mm
4	Inner diameter clearance	Blowing steel ball	A 3mm steel ball can be blown freely through the duct.
5	Ovality	GTOC	≤ 7%
6	Pressurization	5 minutes @12 bar each duct	No damage and leakage
7	Kink	IEC 60794-1-2 Method E10	≤ 50mm
8	Tensile strength	Rate of extension: 100mm/min	≥ 520N
9	Impact	IEC 60794-1-2 Method E4 1.0 J Impact, recovery time 1 hour	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
10	Min. bend radius	60mm	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.

Physical and Mechanical Properties (BUNDLE)
Tube Bundle	No. of ways	Outer Diameter （Nom.）	Wall thickness (mm)	Tolerance (mm)	Max Tensile (N)
HDPE 2x 18/14mm	2	38.4mm	1.2	±0.20	weight*G
HDPE 2x 16/12mm	2	34.4mm	1.2	±0.20	weight*G
HDPE 2x 14/10mm	2	30.4mm	1.2	±0.20	weight*G
HDPE 2x 12/8mm	2	26.4mm	1.2	±0.20	weight*G
HDPE 2x 10/6mm	2	22.4mm	1.2	±0.20	weight*G
HDPE 2x 8/4mm	2	18.4mm	1.2	±0.20	weight*G
HDPE 2x 7/3.5mm	2	16.4mm	1.2	±0.20	weight*G
HDPE 2x 5/3.5mm	2	12.4mm	1.2	±0.20	weight*G
*Customization service available for different sheath thickness or different number of sub-ducts.

Техника изготовления трубы 4way Microduct:

Standards:
Crush performance	IEC 60794-1-2-E3
Tensile & elongation	IEC 60794-1-2-E1
Bend	IEC 60794-1-2-E11
Flexibility	IEC 60794-1-2-E8
Kink	IEC 60794-1-2-E10

Хранилище:

Завершенные пакеты микропродажа HDPE на барабанах могут храниться на открытом воздухе. 12 месяцев до даты производства. Температура хранения: от -40 до +70 ℃ Температура установки: от -20 до +50 ℃ Рабочая температура: от -40 до +70 ℃

Упаковка и производство продукта: